Synthesis of 3′-fluoro-4′-amino-hexitol nucleosides with a pyrimidine nucleobase as building blocks for oligonucleotides

The synthesis of 3′-fluoro-4′-amino-hexitol nucleosides with a uracil and cytosine nucleobase was performed. The synthesis started from 1,5:2,3-dianhydro-4,6-benzylidene-allitol and afforded the target compounds in 15 steps. These protected hexitol nucleosides are valuable building blocks for the preparation of a new class of oligonucleotides.     

Reflection of plane waves in generalized thermoelasticity of type III with nonlocal effect

The generalized thermoelasticity theory based upon the Green and Naghdi model III of thermoelasticity as well as the Eringen's nonlocal elasticity model is used to study the propagation of harmonic plane waves in a nonlocal thermoelastic medium. We found two sets of coupled longitudinal waves, which are dispersive in nature and experience attenuation. In addition to the coupled waves, there also exists one independent vertically shear-type wave, which is dispersive but experiences no attenuation. All these waves are found to be influenced by the elastic nonlocality parameter. Furthermore, the shear-type wave is found to face a critical frequency, while the coupled longitudinal waves may face critical frequencies conditionally. The problem of reflection of the thermoelastic waves at the stress-free insulated and isothermal boundary of a homogeneous, isotropic nonlocal thermoelastic half-space has also been investigated. The formulae for various reflection coefficients and their respective energy ratios are determined in various cases. For a particular material, the effects of the angular frequency and the elastic nonlocal parameter have been shown on phase speeds and the attenuation coefficients of the propagating waves. The effect of the elastic nonlocality on the reflection coefficients and the energy ratios has been observed and depicted graphically. Finally, analysis of the various results has been interpreted.     

Sub‐ and Supramolecular X‐Ray Characterization of Engineered Tissues from Equine Tendon,Bovine Dermis,and Fish Skin Type‐I Collagen

Collagen represents one of the most widely used biomaterial for scaffolds fabrication in tissue engineering as it represents the mechanical support of natural tissues. It also provides physical scaffolding for cells and it influences their attachment, growth, and tissue regeneration. Among all fibrillary collagens, type I is considered one of the gold standard for scaffolds fabrication, thanks to its high biocompatibility, biodegradability, and hemostatic properties. It can be extracted by chemical and enzymatic protocols from several collagen‐rich tissues, such as tendon and skin, of different animal species. Both the extraction processes and the manufacturing protocols for scaffolds fabrication provide structural and mechanical changes that can be tuned in order to deeply impact the properties of the final biomaterial. The aim of this review is to discuss the role of X‐rays to study structural changes of type I collagen from fresh collagen‐rich tissues (bovine, equine, fish) to the final scaffolds, with the aim to screen across available collagen sources and scaffolds fabrication protocols to be used in tissue regeneration.     

Tweaking the acid-sensitivity of transiently thermoresponsive Polyacrylamides with cyclic acetal repeating units

Merging the characteristics of thermoresponsive and stimuli-degradable polymers yields so-called transiently thermoresponsive polymers, which can find application for the design of injectable gels, nanoparticles, etc. within a biomedical context. Among these polymers, only a limited number is reported which shows selective degradation under mild acidic conditions. However,extension of the library of transiently thermoresponsive polymers is desired to broadening the biomaterials toolbox to suit specific needs. Three monomers were developed by modification of 2-hydroxyethylacrylamide(HEAm) via tetrahydropyranylation or-furanylation with 3,4-dihydro-2 H-pyran(DHP), 2,3-dihydrofuran(DHF) or 2,3-dihydro-5-methylfuran(MeDHF). The presence of an acetal or ketal bond provided the monomers a pH-dependent hydrolysis behavior ranging from minutes to days. RAFT polymerisation allowed for the construction of homopolymers with temperature responsive behavior and pH-dependent hydrolysis which was strongly influenced by nature of the monomeric repeating units.     

Discovery of ( ±)-3-(1 H -pyrazol-1-yl)-6,7-dihydro-5 H -[1,2,4]triazolo[3,4- b ][1,3,4] thiadiazine derivatives with promising in vitro anticoronavirus and antitumoral activity

A new series of (?±)-(3-(3,5-dimethyl-1H-pyrazol-1-yl)-6-phenyl-6,7-dihydro-5H-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazin-7-yl)(phenyl)methanones were efficiently synthesized starting from 4-amino-5-hydrazinyl-4H-1,2,4-triazole-3-thiol 1, acetyl acetone 2, various aromatic and heterocyclic aldehydes 3 and phenacyl bromides 4. All the newly synthesized compounds were tested for their antiviral and antitumoral activity. It was shown that subtle structural variations on the phenyl moiety allowed to tune biological properties toward antiviral or antitumoral activity. Mode-of-action studies revealed that the antitumoral activity was due to inhibition of tubulin polymerization.

Graphic abstract

     

Area-Minimizing Currents mod 2Q: Linear Regularity Theory

We establish a theory of Q -valued functions minimizing a suitable generalization of the Dirichlet integral. In a second paper the theory will be used to approximate efficiently area minimizing currents mod(p) when p = 2Q , and to establish a first general partial regularity theorem for every p in any dimension and codimension . © 2020 Wiley Periodicals LLC.     

Cameron–Liebler k-sets in subspaces and non-existence conditions

Designs, Codes and Cryptography - In this article we generalize the concepts that were used in the PhD thesis of Drudge to classify Cameron–Liebler line classes in PG $$(n,q), n\ge 3$$ , to...     

Tissue distribution and excretion study of neopanaxadiol in rats by ultra‐performance liquid chromatography quadrupole time‐of‐flight mass spectrometry

Neopanaxadiol (NPD), a major ginsenoside in Panax ginseng C. A. Meyer (Araliaceae), was reported to have neuroprotective effect. In this study, a method of ultra‐performance liquid chromatography quadrupole time‐of‐flight mass spectrometry (UPLC/QTOF‐MS) was developed and validated for quantitative analysis of NPD in tissues, urine and feces, using liquid–liquid extraction (LLE) to isolate NPD from different biological samples, and chromatographic separation was performed on an Agilent Zorbax Stable Bond C₁₈ (2.1 × 50 mm, 1.8 µm) column with 0.1% formic acid in water and acetonitrile. All standard calibration curves were linear (all r² > 0.995) within the test range. After oral administration, NPD was extensively distributed to most of the tissues without long‐term accumulation. The higher levels were observed in stomach and intestine, followed by kidney and liver. Approximately 64.56 ± 20.32% of administered dose in feces and 0.0233 ± 0.0356% in urine were found within 96 h, which indicated that the major elimination route was fecal excretion. This analytical method was applied to the study of NPD distribution and excretion in rats after oral intake for the first time. The results we found here are helpful for us to understand the pharmacological effects of NPD, as well as its toxicity. Copyright © 2014 John Wiley & Sons, Ltd.     

Crystallization of the mesomorphic form and control of the molecular structure for tailoring the mechanical properties of isotactic polypropylene

The combination of the control of the concentration of stereodefects in isotactic polypropylene using metallocene catalysts and the crystallization via the mesophase is a strategy to tailor the mechanical properties. Stiff materials, flexible materials, and thermoplastic elastomers can be produced depending only on the concentration of rr stereodefects. Modulus, ductility, and strength can be modulated through the crystallization of α and γ forms or of the mesophase. Different morphologies are observed depending on the stereoregularity and conditions of crystallization. Crystals of the mesomorphic form always exhibit a nodular morphology, accounting for the similar good deformability of all quenched samples, whatever the concentration of stereodefects. The mesophase transforms by thermal treatments into the α form preserving the nodular morphology, with increase of strength while maintaining the ductility typical of the mesophase. Annealing of the mesophase permits a precise adjustment of crystallinity and size of nodular crystals offering additional options to modify the mechanical properties. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 677–699     

Aqueous and nonaqueous lithium-air batteries enabled by water-stable lithium metal electrodes

The extremely high theoretical energy density of the lithium-oxygen couple makes it very attractive for next-generation battery development. However, there are a number of challenging technical hurdles that must be addressed for Li-Air batteries to become a commercial reality. In this article, we demonstrate how the invention of water-stable, solid electrolyte-protected lithium electrodes solves many of these issues and paves the way for the development of aqueous and nonaqueous Li-Air batteries with unprecedented energy densities. We also show data for fully packaged Li-Air cells that achieve more than 800 Wh/kg.